The DEWALT 2-in-1 Pneumatic Flooring Tool drives 15.5-Gauge staples 33-50mm or 16-Gauge "L" cleat nails from 1-1/2 in. to 2 in. length. This tool features mallet actuated pneumatic driving action.

Important Safety and Operating Tips

• Use specified fasteners: Only load fasteners that meet DeWALT specifications, specifically 16-gauge L-cleat nails or 15-1/2 gauge crown staples sized 38 mm to 50 mm. [1, 2]
• Disconnect air supply: Always disconnect the air hose from the tool before clearing jams, loading, or performing maintenance. [1, 2]
• Test drive depth: Test a few fasteners on a spare piece of flooring material to verify proper setting depth before working on your main surface.

Step-by-Step Loading Instructions

• Retract the pusher: Pull the spring-loaded pusher back toward the rear of the magazine until it locks securely in the rear position. [1, 2]
• Insert the fasteners: Drop a stick of 16-gauge L-cleat nails (or compatible 15-1/2 gauge flooring staples) down into the top loading channel or track of the magazine. [1, 2]
• Release the pusher: Press the detent/release tab on the pusher mechanism to disengage the lock. [1, 2, 3]
• Engage forward position: Slide the pusher forward until it rests firmly against the back of the fastener strip, applying constant feeding pressure.