Description
Tsurumi HS2.4S Submersible Trash Pump with Agitator
Rental Equipment Overview Sheet
Equipment Description
The Tsurumi HS2.4S is a professional-grade 2-inch electric submersible trash pump designed for construction, rental, and dewatering applications. Powered by a 1/2 HP (0.4 kW), 115V single-phase motor, this rugged pump features a built-in agitator that stirs up sand, silt, and sediment to prevent clogging and improve pumping performance. It is ideal for pumping dirty water, excavation pits, flooded basements, utility trenches, and job sites.
Key Features
- 1/2 HP (0.4 kW) heavy-duty induction motor
- Operates on standard 115V household power
- 2-inch discharge
- Built-in agitator suspends sediment for easier pumping
- Semi-vortex impeller designed for dirty water
- Handles sand, silt, and small debris
- Double mechanical seal in oil bath for extended seal life
- Patented oil lifter system improves lubrication and durability
- Lightweight cast aluminum housing
- Continuous-duty construction designed for rental fleets and contractors
- Thermal overload motor protection
- Automatic models available (this unit is manual operation unless otherwise specified).
Specifications
| Specification | Details |
|---|---|
| Pump Type | Electric Submersible Trash Pump |
| Model | Tsurumi HS2.4S |
| Motor | 1/2 HP (0.4 kW) |
| Voltage | 115V, Single Phase |
| Discharge Size | 2 in. |
| Maximum Flow | Up to 53 GPM (200 L/min) |
| Maximum Head | 39 ft. (12 m) |
| Maximum Solids Handling | 0.28 in. (7 mm) |
| Maximum Water Temperature | 104°F (40°C) |
| Dry Weight | Approximately 25 lbs. (11.3 kg) |
| Power Cord | 32 ft. |
Common Rental Applications
- Construction site dewatering
- Utility trench drainage
- Excavation water removal
- Flooded basements
- Crawl spaces
- Elevator pits
- Septic and wastewater bypass pumping
- Pond and fountain maintenance
- Agricultural drainage
- Emergency storm cleanup
What's Included
- Tsurumi HS2.4S Pump
- 32-foot power cord
- Carrying handle
- 2-inch hose adapter
- Operator instructions
Discharge hose rented separately unless noted.
Operating Instructions
- Inspect pump and electrical cord before use.
- Attach a 2-inch discharge hose securely.
- Lower the pump into the water using the handle or rope (never by the power cord).
- Ensure the pump remains fully submerged during operation.
- Connect to a properly grounded 115V GFCI outlet.
- Switch power on.
- Monitor discharge flow and keep the intake free from large debris.
- Disconnect power before removing or servicing the pump.