Description
Billy Goat BC2601HH Outback Brush Cutter 26” Wide Hydro Drive Pivoting Deck Honda 388cc Engine. Make quick work of under-brush, berries, saplings, bramble, vines, tall grass and small trees! The Outback® BC26 can cut saplings up to 2” wide and brush 6’ tall – all at a rate of just under an acre of brush per hour. The BC26 has a 26” wide deck with higher tip speed for improved speed and cut quality. This nature-taming performer comes standard with a Tuff-Torq™ hydrostatic transmission featuring fully automatic Enhanced Traction Control (ETC ), offering superior traction in wet or uneven conditions. Engineered to glide over uneven terrain, the pivoting brush deck hugs the ground for a better cut. This minimizes scalping and improves traction by keeping the weight of the machine on its drive wheels. (Honda engine version can handle up to 20-degree slopes.)
Key Specifications
- Engine: Honda GXV390 (389cc / 10.2 HP), recoil start.
- Cutting Width: 26 inches (66 cm).
- Capacity: Cuts brush up to 6 feet tall and saplings up to 2 inches in diameter.
- Productivity: Clears approximately 28,600 sq. ft. per hour (just under an acre).
- Transmission: Tuff-Torq hydrostatic transaxle with Enhanced Traction Control (ETC).
- Weight & Dimensions: 325-lbs (147 kg); 81.5" L x 30.75" W x 47.6" H.
Detailed operating instructions and maintenance schedules can be found in the official Billy Goat BC26 Series Manual.
The Billy Goat BC2601HH Outback Brush Cutter troubleshooting guide covers common engine, drive system, and cutting performance issues for hydro-drive models powered by Honda engines (https://blog.billygoatparts.com/troubleshooting-guide-for-billy-goat-brushcutters/)
For visual guidance on starting procedures and operating controls, watch this overview:
Safety First
- Disconnect the spark plug wire before inspecting, cleaning, or servicing the deck or belts.
- Wear heavy-duty gloves and eye protection.
- Allow the engine and muffler to cool completely before touching internal components.